Sanyo LCD-26XZ11 Instruction Manual

Also see for LCD-26XZ11: Service manual

Using MUSIC Player & Using USB Multi Media PlayerUsing MUSIC playerYou can connect your MP3 player to MUSIC jack on the TV side to listen to music from your TV.Be sure to switch to MUSIC source firstly by pressing INPUT button.During music playing and you want to save power, please go to OPTION menu and set Audio Only to PowerSaving, then a message “Audio Only, it will go to power saving mode” appears, after some seconds thebacklight will turn off automatically.You can connect a USB device (such as U disk, portable hard disk, MP3 card, USB memory media, etc. with a USBinterface) to your TV to view compatible photo, movie, text on the large screen of the TV or play compatible music sothat the sound can be output from the TV’s speakers.To use USB multi media player, please go to USB source through Input Source menu by pressing INPUTbutton.Notes:·Never remove the USB device or turn off the TV while using the USB device.·It is recommended that you back up your USB device data.·The USB menu may vary in different situation.·If you want to pull out the USB device, please exit USB mode first. For instructions on using your USB device,refer to the owner’s manual of your USB device.·Please use English to name your files. Otherwise the file names can not be shown correctly.·Certain types of USB device may not be compatible with this TV.Using USB multi media player30USB multi media interface introduction12Connect your USB device. Select USB mode through the Input Source menu, the USB multi mediainterface (main menu) will appear automatically.!! MUSIC — Selects to playback compatible music.! MOVIE — Selects to playback compatiblemovie.! TEXT — Selects to view compatible text.PHOTO — Selects to view compatible photos.Press 3or 4to select your desired media, pressOK to access. You can select:USB 2.0PHOTO MUSIC MOVIE TEXTUsing the remote control to operate the USB multi media playerPLAY/PAUSE button During playback if you want to pause it, press the PAUSE ( ) button.To return to normal playback, press the PLAY (4) button.STOP buttonReverse/fast forwardPrevious/nextRepeat mode select buttonGo back buttonDuring playback if you want to stop it and exit, press the STOP ( ) button.When playing music or movie, press / for reverse/fast forward.Go to previous/next file.Press the button repeatedly to select your desired repeat mode. You canselect Repeat 1 (repeat to play one file), Repeat All (repeat to play all fileswhen playback reaches end), No Repeat (no repeat when playback reachesend).When in USB menu navigation, press the button to go back.