Sanyo LCD-26XZ11 Service Manual

5.4 D-SUB portInput D-SUB signal from VG-849 with formats listed as Table 3 separately, check picture andsound; if H./V. of picture displays abnormally, enter into main menu Picture->Screen->Auto Adjust toperform auto calibration.Table 3 D-SUB signal formatsNo. Definition H.- Freq.(kHz)V.- Freq.(Hz)Dot pulse Freq.(MHz) Note1 640×480 31.469 59.94 25.175 IBM2 720×400 31.469 70.086 28.322 IBM3 640×480 37.861 72.809 31.5 VESA4 640×480 37.5 75 31.5 VESA5 800×600 35.156 56.25 36 VESA6 800×600 37.879 60.317 40 VESA7 800×600 48.077 72.188 50 VESA8 800×600 46.875 75 49.5 VESA9 1024×768 48.363 60.004 65 VESA10 1024×768 56.476 70.069 75 VESA11 1024×768 60.023 75.029 78.75 VESA12 1152×864 67.5 75 108 VESA13 1280×960 60 60 108 VESA14 1280×1024 63.98 60.02 108 VESA15 1280×1024 80 75 135 SXGA16 1360×768 47.7 60 85.5 WXGA17 1440×900 55.9 60 106.5 WXGA+ ( PanelNational only)18 1680×1050 65.3 60 146.25 WSXGA+ ( PanelNational only)19 1920×1080 67.5 60 148.55.5 HDMI portHDMI port supports all signal formats supported by Component port (Table 2) and D-SUB port(Table 3), furthermore, it can also support signal with formats listed as Table 4 and Table 5 (video andaudio combination). Check picture and sound in the case of power-on, switching channel, changingmode, etc.;Table 4 Digital HDMI signal formatsNo. Definition H.- Freq.(kHz)V.- Freq.(Hz)Dot pulseFreq.(MHz)Note1 720(1440)×480 15.734/15.75 59.94/60 27/27.027 720(1440)×480i@59.94/60 Hz,4:3/16:92 720(1440)×576 15.625 50 27 720(1440)×576i@50 Hz,4:3/16:9