Sanyo LCD-27XA2 Instruction Manual

Also see for LCD-32XA2: Service manual

Contents

1717Menu OperationSemi-auto TSemi-auto TuninguningThis is used to preset a channel in any pro-gramme position.11 Select “Prog. Preset” with in thePreset menu.PresetPresetSwapFine TuningAuto Tuning >PP< >Prog. Preset >- - -SemiSemiSoundPPSystemBGAuto007PositionFrequency 271.65 MHzFine TFine TuninguningPresetPresetSwapAuto Tuning >PPProg. Preset >Fine Tuning < >- - -22 Press and hold or to fine tune achannel.33 Press the MENU button to exit.The tuning will be stored when you exitthe menu.Any changes made by fine tuning willremain even when the TV set is turned off.33 Select “Position” with .To select desired programme position:Press the Digit (-/--) button and enterthe position number (000-254) using 0-9buttons.orPress to select programmeposition sequentially.66 Select “Memory” with , and press theOK button to memorize.77 Press the MENU button to exit.Repeat steps 3-6 to store other channels inother programme positions.• If the clear picture cannot be obtained,change the colour system with or .• If the sound is not clear or no sound isproduced, change the sound systemwith or .11 Select “Fine Tuning” with in thePreset menu.22 Press to enter the Semi-auto Tuningmode.SemiSemiSoundSkipPPSystemMemory OK?OFFBGAuto010PositionFrequency 273.25 MHz55 You can either...a) Press the Digit (-/--) button, and enterthe frequency (5 digits) using 0-9buttons referring channel table.b) Press and release (toward the lowerfrequency) or (toward the higherfrequency) to search a TV station.Once a station is found, tuning will stopautomatically. Repeat until desiredstation is found.SemiSemiSoundSkipPPSystemMemory OK?OFFBGAuto010PositionFrequency 273.25 MHz44 Select “Frequency” with .