Sanyo LCD-27XA2 Service Manual

Also see for LCD-27XA2: Instruction manual

Contents

-14-Mechanical Disassembly3. Chassis RemovalAfter removing Cabinet Back and Stand, remove 8 screws of Chassis base, remove 2 screws of ASSY, PWB,CONTROL, disconnect each connectors and the chassis can be taken out.ASSY, PWB, CONTROLSpeakerSpeakerChassis BaseASSY, PWB, SIGNALHow to Remove Flat CableThere are following kinds of the connectors of flat cable. Be careful not to damage a connector in the case of removal ofa flat cable or attachment.Type-AFor removal of flat cable, lift up thehook of both sides.For insert and fixing, hold down thehook after inserting the flat cable.CableType-BFor removal of flat cable, slide thehook of both sides.For insert and fixing, slide the hookto previous position after insertingthe flat cable.CableType-CCableFor removal of flat cable, pull off only.For fixing, insert into the socket.Type-DCableFor removal of flat cable, hold downthe hook.For insert and fixing, lift up the hookafter inserting the flat cable.ASSY, PWB, POWERASSY, PWB, SCALFan Motor