Sanyo LCD-32CA8Z Service Manual

Also see for LCD-32CA8Z: Owner's manual

Contents

Sanyo LCD-32CA8Z Service Manual Manual pdf 7 page image

7How to adjust White Balance Adjustment1. Input a white pattern(80%) to the composite input terminal.2. Set the television to following conditions:Picture mode: standardColour temperature: normalPre-heading time: more than 10 minutes3. Enter the service mode, and select item 291with ▲ or ▼ key.Select RGB with ▲ or ▼ key.Press ◄► to adjust the value of RGB until the white balance R, G,B is all 85h.3. After adjustment, confi rm white balance again by normal picture.ADC AdjustmentNote:Because White Balance Adjustment will be changed when adjusting ADC. After adjusting ADC, please resetWhite Balance Adjustment.How to adjust ADC1.Recive 100% COLOUR BAR from AV1.2. Enter to SERVICE MODE.3. Remove the cursor from [Source] to [Properties]. And then select "ADC Calibration", press OK button.4. Wait for about 15 seconds until the adjustment is fi nished. Then press MENU button to exit.Service AdjustmentsImportant Notice:Do not attempt to adjust service adjustments not listed below otherwise it may cause loss of performanceand for correct operation.White Balance Adjustment