Sanyo LCD-32XR11 Service Manual

Also see for LCD-32XR11: Instruction manual

Contents

would be unable to work and no way to get it repaired.If the connection wires, connections or components fixed by the thermotropic glue need todisengage when service, please soak the thermotropic glue into the alcohol and then pull themout in case of dagmage.2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may leadto breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strongcase before the transportation or handling.2.12 For the storage make sure to put it in a place where the environment can be controlled so asto prevent the temperature and humidity from exceeding the limits as specified in the manual. Forprolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether inone place. The ambient conditions are tabulated as follows:Temperature Operation range +5 ~ +35 o CStorage range -20 ~ +60 o CHumidity Operation range 20% ~ 80%Storage range 10% ~ 90%2.13 Display of a fixed picture for a long time may cause a permanent after-image on the screen,as commonly called “ghost shadow”. The degree of the after-image varies with the maker of LCDscreen. This phenomenon doesn’t represent failure. This “ghost shadow” may remain in thepicture for a period of time (several minutes). But when operating it please avoid displaying stillpicture in high brightness for a long time.3. Installation precautions3.1 The front panel of LCD screen is made of glass. When installing it please make sure to put it inplace.3.2 For service or installation it’s necessary to use specified screw lest it should damage thescreen.3.3 Be sure to take anti dust measures. Any foreign substance that happens to fall down betweenthe screen and the glass will affect the receiving and viewing effect3.4 When dismantling or mounting the protective partition plate that is used for anti vibration andinsulation please take care to keep it in intactness so as to avoid hidden trouble.3.5 Be sure to protect the cabinet from damage or scratch during service, dismantling ormounting.