Sanyo LCD-37XR1 Instruction Manual

Connections (continued)Note:Select Main Source1. TV2. Video3. S-Video4. Scart 16. Scart 2 Y/C7. YPbPr8. D-Sub9. HDMI5. Scart 2 AV10Connect a VCRConnect the SCART Cable between the unit and the VCR.How to connect:1. Turn on your LCD TV , press SOURCE button on the remotecontrol.2. Push ENTER(Up/Down) to select Scart2 AV and press ENTER toconfirm.3. Turn on your VCR , insert a videotape and press the Play button.To play VCR-S VIDEOAV INRear of the VCRVCRRLVIDEO AUDIO21-pin SCARTconnectorSCART CableSCART<The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.<When receiving Y/C signal, you need to select Scart 2 Y/C instead of Scart 2 AV in the source select menu. Therefore,if you find that the colour is not properly displayed, please try to select Scart 2 Y/C.<To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART interfaceon the unit , then please select Scart 2 AV and the unit receives CVBS (VIDEO) signal only.SCART1 VIDEO/RGB( )D-Sub INAUDIOD-S ubHDMI/DVIUPDATEYLRbPrPCOMPONENT INRFSCART2 VIDEO/S-VIDEO( )SCART2 VIDEO/S-VIDEO( )