Sanyo LCD-40XR10F Instruction Manual

Also see for LCD-40XR10F: Service manual Service manual

Memorizing the Channels & Programme EditATV manual tuning - analogue only -123Use the Manual Tuning operation if desired channels can not be presetby Auto Tuning or if you would like to preset channels to specificposition numbers one by one.From ATV Manual Tuning setting menu, press 6or5to selectan item, press 3or4to set the item as shown below.A. Storage To: Position selection. Press 3or4button to selectthe position you want to store.B. System: Sound system selection. If certain channel’s sound isabnormal, it may be that the sound system setting is wrong. Inthis case, select another sound system.C. Current CH: Selects current channel using 3or4.D. Search: Channel search operation.Press 4to search up the band or3to search down the band.Press 3or4repeatedly until your desired channel is displayed.E. Fine-Tune: Manual fine tuning.Press 3or4until better picture and sound are obtained.F. Frequency: Shows current frequency, it can not be adjusted.(During the process, you can press EXIT to exit the operation.)In CHANNEL menu, press 6or5to select ATV ManualTuning, then press4or OK to access the setting menu.SELECT MOVE MENU RETURNProgramme EditFile SystemAuto TuningDTV Manual TuningATV Manual TuningATV Manual TuningStorage To 11SELECTSystemCurrent CHSearchFine-TuneFrequencySAVEEXITC-02BG445.25 MHzPICTURE SOUND TIME OPTION LOCK CHANNELPress RED button to save your settings.Adding or changing a channel label- analogue only -If a channel is not already labeled, you can label the channel to make iteasier to identify. You can also relabel a channel that is already labeled.Programme Edit1TV S-032TV C-423TV S-044TV C-04NAMEDEL MOVE SKIP Fav.ListSELECT MOVE MENU RETURNAuto TuningDTV Manual TuningATV Manual TuningProgramme EditPICTURE SOUND TIME OPTION LOCK CHANNELFile System4Within the programme list, press 6or5to select a channel youwant to label, press GREEN button to start to label. A cursorappears at the edit field.Use 6or5to select a character, use 3or4to move the cursor.When finished, press OK to confirm.The maximum length of label is 5 characters.1 Press MENU. Press 3or4to select CHANNEL menu, press6to access.23Press 6or5to select Programme Edit, press 4or OK toopen the Programme Edit menu and a programme list isdisplayed.5 Repeat the above steps to label more channels.Note: The labels of DTV channels are automatically assigned andcannot be changed by user.19