Sanyo LCD-42XR8KH Service Manual

Contents

Assembling & Removing the StandSafety Precautions:1.Please read these instructions thoroughly prior to attempting this installation.2.Be sure to handle this product very carefully when attempting assembly. If you are unsure of your capability, or the use of tools necessary to complete this activity,refer to a professional installer or service personnel. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or improperassembly/installation.3.When using a table or bench as an aid to assembly, be sure to put a soft cushion or covering to prevent accidental scratching or damage to the unit's finish.4.The speaker is not intended to support the weight of this display. Do not move or handle this product from the speaker; which can cause damage to the display notcovered under the manufacturer's warranty.To install the stand:1.Lay your TV flat (screendown) on a table or bench.Make sure that you putdown a soft cushion or clothso that your TV is notscratched.3. Using the supplied five M5 screws totighten the stand securely.Accessories: 1. Stand (1 unit) 2. M5 Screw (5 units)Tighten with fiveM5 screws2 Align the fixating holes of the stand withthe protruding holes on the TV bottom standcolumn, fully attach the stand to the standcolumn.To remove the stand column: (if wall mounting)1.Lay your TV flat (screen down) on a table or bench. Makesure that you put down a soft cushion or cloth so that yourTV is not scratched.2.Remove the four screws holding the stand column to yourTV, then remove the stand column.Note: To detach the stand from the standcolumn, perform the steps in reverse order.Protruding holesStand ColumnFixating holesNOTE：1.Appearance of this product in illustrations may differ from your actual product, and is for comparative purposes only.2.Design and specifications are subject to change without notice.Attach the stand tothe stand columnStandScrewsRemove the stand column

/ 36

Related manuals for Sanyo LCD-42XR8KH