Sanyo LCD-42XR9DA Instruction Manual

Also see for LCD-42XR9DA: Service manual

Basic Operations (Continued)Installation GuideExitExitLanguage EnglishStartOKAuto TuningCountry Selection AustraliaCancelStart14First Time Setup13Make sure that:Press 3or4to select Standard/Energy Save orStore/Dynamic. Press OK to confirm the selection.With the power on, press the Power button on the unit or on the remote control to turn off the unit, and put the unit instandby mode. To cut off the power completely, press the Power Switch directly.Turning OnInsert the power cord into the wall outlet. Press the Power Switch on the unit to power on.If the unit is in standby mode, press Power button on the unit or the remote control to turn on the unit, and you will be readyto use its features.Turning OffTurning On/Off the PowerThe first time you use the TV, you need to set up the TV.! You have installed the batteries in the remote control.! You have connected the TV to an antenna or cable TV outlet.! You have connected the power cord.2 Press POWER to turn on the TV. After a few secondsthe Energy Save Mode screen opens.4 Now the Installation Guide screen will display.Highlight Auto Tuning item, and press OK to access.Installation GuideExitExitLanguage EnglishStartOKAuto Tuning5 Press 3or4to highlight Start item, and then Press OK tobegin the auto channel search.=The Language and Country Selection items are defaulted and cannot be adjusted.NoteNavigateTo use this TV for displaying in a store, please select [Store/Dynamic].[Standard/Energy Save] mode is recommended for normal home use.Energy Save ModeStore/DynamicStandard/Energy SaveConfirmOK