Sanyo LCD-46XR10DKH Service Manual

Assemble & Disassemble the Pedestal Base (Option)Safety Precautions:1.Please read these instructions thoroughly prior to attempting this installation.2.Be sure to handle this product very carefully when attempting assembly. If you are unsure of yourcapability, or the use of tools necessary to complete this activity, refer to a professional installer orservice personnel. The manufacturer is not responsible for any damages or injuries that occur due tomishandling or improper assembly/installation.3.When using a table or bench as an aid to assembly, be sure to put a soft cushion or covering to preventaccidental scratching or damage to the unit's finish.4.The speaker is not intended to support the weight of this display. Do not move or handle this productfrom the speaker; which can cause damage to the display not covered under the manufacturer'swarranty.Installing the StandIf the stand is provided, please read these instructions thoroughly before attempting this installation.To remove the stand from the TV, perform these steps in reverse order.1. Remove the stand from the box and place it on a table or bench.You must pay attention to the direction of the stand. The wide portion of the stand should go towards thefront of the TV.2. Lay your TV flat (screen down) on the edge of a table or bench. Make sure that you put down a softcushion or cloth so that your TV is not scratched.3. Put the stand close to the TV back, align the stand with the TV by moving the stand steadily until the StandLocators align with the locating grooves on the stand. And align the screw holes on the TV back with theholes in the stand, then secure the stand to the TV with provided screws.NOTE:1.Appearance of this product in illustrations may differ from your actual product, and is forcomparative purposes only.2.Design of this accessory or display products are subject to change without notice.StandLocatorsLocating groovesSecure withfour screws

/ 41

Related manuals for Sanyo LCD-46XR10DKH