AC cordHouseholdpower outletAntenna Connection Connect one end of your antenna cable to the RF jack on the back ofthe TV, then connect the other end of the cable to the antenna walljack.Note:=It is recommended that the 75-ohm coaxial cable be used to eliminateinterference and noise which may occur due to radio wave conditions.=The antenna cable should not be bundled with the power cord and the like.=If the antenna is not installed properly, contact your dealer for assistance.Connections=When connecting an external device to the TV, make sure that the TV and the device are turned off.=Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jackson the TV.=Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems.=The illustration of the external device may be different depending on your model.=Refer to the operating manual of the external device as well.Cautions Before Connecting10Power Connection Connect the power cable to the AC IN socket on the back of the TV,then connect the other end to a power outlet.Note:=This product should be operated only from the type of power source indicatedon the marking label.=Always unplug the AC cord from power outlet when not using for a long period oftime.=This illustration is for reference only. The AC plug may be different on differentmodels.Connecting HeadphonesInsert the plug of the headphone into the TV’s Headphone jack.When using headphones, adjust the headphone volume so as to avoidexcessive levels, as hearing damage may result.Connecting a USB device Insert your USB device into the USB port.To play from the USB device:1. Turn on your TV, then press INPUT button. The Input Source menuopens.2. Press 5or6to select USB, then press OK to confirm.Never remove the USB device or turn off the TV while using the USB device.To connect headphones:75-ohm coaxial cable(round cable)TV REARTV SideTo USB portHeadphonesTV Side