6To receive FM stereo broadcastsSet the FM MODE switch to ST.• If the signal from an FM stereo station isweak and reception is poor, set the FMMODE switch to MONO. The receptionmay be improved, but the sound will bemonaural.To improve receptionFM: Pull out the telescopic aerial and adjustits position.AM: Rotate the unit.1. Set the FUNCTION switch to RADIO.2. Select the desired radio band with theBAND switch.3. Tune in a desired station by turning theTUNING control.4. To turn the radio off, set the FUNCTIONswitch to TAPE/OFF.LISTENING TO THE RADIORecording copyright material without permis-sion of the copyright owners is usually aninfringement. If you wish to re-record copyrightmaterial, permission from the copyright owner isnecessary. SANYO does not approve of, andcannot be held responsible for, any unlawful useof this machine.Recording compact discs (Synchronousrecording)1. Load a blank cassette.2. Select “CD” function.3. Load the disc to be recorded.• Select the track number if required.• For programmed recording, programmethe material in advance (as describedunder “PROGRAMMED PLAY”).4. Press the REC button. The PLAY button isengaged simultaneously and CD record-ing starts.5. Press the STOP/EJECT button to stoprecording.Recording from the radio1. Load a blank cassette.2. Tune in the radio station to be recorded.3. Press the REC button to start recording.4. Press the STOP/EJECT button to stoprecording.When beat is heardBeat (a high-pitched noise) may sometimes beheard during the recording of radio broadcasts.If this occurs, set the BEAT CANCEL switch to 1or 2 position that reduces the level of the beatnoise.Safeguards against accidental erasureTo protect side A, break out tab (1). To protectside B, break out tab (2).• To erase or record a protected cassette,cover the tab openings with adhesive tape(3).Note:The REC button cannot be depressed whenusing a protected cassette.RECORDING