Sanyo PDG-DHT100L Service Manual

Also see for PDG-DHT100L - DLP Projector - HD 1080p: Brochure Brochure & specs Owner's manual Specifications Owner's manual

Contents

Sanyo PDG-DHT100L Service Manual Manual pdf 9 page image

-9-MaintenanceFilter InstructionsFilter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomesclogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup andadversely affect the life of the projector. This projector has an electrically operated filter which helps you to replacethe filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a new oneautomatically when it detects the clogging.If the projector reaches a time set in the timer setting, a Filter re-placement icon (Fig.1) appears on the screen and the WARNINGFILTER indicator on the top panel lights up. When you see this icon,replace the filter as soon as possible. If the filter is out of scroll andthe projector reaches a time set in the timer setting, Fig. appearson the screen, indicating that the filter cartridge replacement is nec-essary.When the filter scroll is counted down to 1, the Last scroll icon(Fig.3) appears on the screen, indicating that there is one scroll leftin the filter cartridge.If the projector detects that the filter is clogged and no scroll is leftin the filter cartridge, a Filter cartridge replacement icon (Fig. 4) ap-pears on the screen and the WARNING FILTER indicator on the toppanel lights up. When you see this icon, replace the filter cartridgeand reset the Filter counter and the Scroll counter.When the filter is being scrolled by the remote control or the Fil-ter control function in the setting menu, a Filter replacement iconand “Please wait...” message (Fig.5) appear on the screen and theWARNING FILTER indicator blinks slow (approx. seconds ON, seconds OFF).The WARNING FILTER indicator blinks fast when the projector de-tects an abnormal condition, the filter cartridge is not installed prop-erly, or the filter scroll is not working properly.Fig.1 Filter replacement iconFig.4 Filter cartridge replacement iconFig.3 Last scroll icon✔Note:• Fig.1, Fig., Fig.3 or Fig. 4 will not appear when theDisplay function is set to “Off”, or during “Freeze”.• The filter cannot be rewound.• The filter can be scrolled 9 times since the filter cartridgehas 10 scrolls.• The filter cartridge is disposable. Do not clean and reusethe filter cartridge.• Do not expose the filter cartridge to water or liquid, or itmay cause a breakdown.• Replace the filter cartridge after all the scroll is used up. Ifyou replace the filter cartridge when there are some scrollsleft in the filter cartridge, the filter counter and the scrollcounter do not recognize the correct number of remainingscrolls and the reset function cannot work properly. It maycause a breakdown.• The used part of the filter can be seen on the edge of theFilter cartridge after scrolling the filter, but there is no prob-lem for the use of the projector.• Do not use the filter cartridge with other projector. The filtercounter and the scroll counter do not recognize the correctnumber of remaining scrolls of the used filter cartridge andthe reset function cannot work properly. It may cause abreakdown.• Make sure that the projection lamps are turned off whenyou are replacing the filter cartridge. If you replace the filtercartridge when the projection lamps are turned on, theprojector will be shut down automatically for safety pur-poses.• Do not forget to reset the filter counter and the scroll coun-ter in the setting menu after replacing the filter cartridge.If you forget to reset the filter counter and the scroll coun-ter, the projector cannot recognize the correct number ofremaining scrolls and it may cause a breakdown.• When the projector is kept used for 3 minutes without get-ting the filter cartridge replaced after the Fig.4 appears onthe screen, the projector is turned off automatically to pre-vent the damage of optical components.Fig.5 Filter replacement icon and“Please wait...” message.Fig.