Sanyo PDG-DWL2500 - 2500 Lumens Owner's Manual

Also see for PDG-DWL2500 - 2500 Lumens: Specifications Specifications Dimensional drawing Specifications Specifications

5 ENGLISHSystemThis function is to select the system of signalinput to the projector. The available systemmode are listed on the pull-down menu but-ton according to the input signal. Select asystem and then click Set button.* When the input signal is any of Video, S-video, Scart, Component or HDMI, it only dis-plays the current system of signal input but no suggested system.Control✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.38) is available,they are also listed together with the above mode.Available system at the RGB inputItem DescriptionXGA1 ........................ It automatically switches to the proper computer system of the input signal.* The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meetthe input signal are listed.Available system at the Video/S-video/Scart inputItem DescriptionNTSC ......................... It automatically switches to the proper color system of the input signal.* The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N.* Auto is fixed at the Scart input.Available system at the Component inputItem Description480p ......................... It automatically switches to the proper scanning system of the input signal.* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p and 1080i.Available system at the HDMI inputItem DescriptionD-XGA...................... It automatically switches to the proper computer system of the input signal.* The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet theinput signal are listed.D-480p .................... It automatically switches to the proper scanning system of the input signal.* The selectable scanning systems are D-480p, D-575p, D-720p and D-1080i.