Sanyo PDP-42XR9DA Instruction Manual

Also see for PDP-42XR9DA: Service manual

Memorizing the ChannelsWhen you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV.Note: Be sure to select the proper input source (ATV/DTV) before operation.1Highlight VHF CH ( or UHF CH) item, press 3or4button toselect your desired channel number.In Channel menu, press 6or5to select DTV Manual Tuningitem, then press4or OK to access.2If desired digital programs cannot be searched by Auto Tuning, you can makeuse of DTV Manual Tuning to search programs manually.Press OK to begin the manual DTV channel search.3 At the bottom of the menu screen the DTV Signal strength bar isdisplayed. You can make use of it to check how strong your DTVsignal is and whether you need to adjust your antenna or digitalcable input. The higher the signal strength is, the less likely you areto experience picture degradation.16Picture Sound Time Option Lock ChannelSelect Move Menu ExitDTV Manual TuningATV Manual TuningProgramme EditAuto Channel SearchYou should perform an auto channel search to search for all channels available and stores them in memory.1 Press MENU and the main menu screen displays.And before you start Auto Tuning, it is necessary to select a country firstly.Then the TV begins memorizing all ATV/DTV channels available inyour area. During the process, you can press MENU to skip thesearch, or EXIT to stop.Auto TuningCountry Selection AustraliaCancelStart3 Highlight Auto Tuning item, and press 4or OK to access.2 Press 3or4to select Channel menu, press 6to access the menu.45Now a confirmation box appears on the screen. Press 3or4tohighlight Start item, and then press OK to begin the autochannel search.(If you want to cancel, press 4to select Cancelitem, and use OK to confirm.) Channel Tuning2 %... TVATVDTVRadioPress to skip.Press to exit.:2 Programme(s):0:0Programme(s)Programme(s)78.50MHzManual Searching for DTV programsPicture Sound Time Option Lock ChannelSelect Move Menu ExitATV Manual TuningProgramme EditAuto TuningDTV Manual TuningDTV Manual TuningPlease select channel thenPress OK to searchBad GoodNormalVHF CH 6SelectMenuThen all the digital programs available in this channel will besearched and stored. During the process, you can press MENU orEXIT to exit the search.4Note=In the confirmation box, the Country Selection item is defaulted to be Australiaand cannot be adjusted.Exit