Sanyo PDP-50XR9DA Instruction Manual

1Highlight Storage To item, press 3or4button to select a channelposition in which you want to store.In Channel menu, press 6or5to select ATV Manual Tuningitem, then press4or OK to access.2If desired analog programs cannot be searched by Auto Tuning, you can makeuse of ATV Manual Tuning to search programs manually.Use 6or5to select Search item, press 3or4to begin themanual ATV channel search.Press 4, the unit searches towards higher frequency;Press 3, the unit searches towards lower frequency.3Manual Searching for ATV programsPicture Sound Time Option Lock ChannelSelect Move Menu ReturnProgramme EditAuto TuningDTV Manual TuningATV Manual TuningThe search stops when a program is found and this program will bestored in current channel, then press the RED button to save. Dthe process, If you want to stop the search , please press EXIT button.uringManual Fine TuningFine Tuning is not necessary under normal conditions. However, in area ofinferior broadcast conditions where adjustment is necessary for a betterpicture and sound effect, use Fine Tune.Navigate to ATV Manual Tuning submenu, highlight CurrentCH item, press 3or4to select a channel you want to perform finetune.1Press 6to select Fine-Tune item, and then use 3or4button tofine tune until the best possible picture and sound are obtained.2During the process, press EXIT to exit, and RED button to savethe effect.3Note=Fine Tune is only for analog TV program.Memorizing the Channels (Continued)174ATV Manual TuningStorage To 1SelectColor SystemAudio SystemCurrent CHSearchFine-TuneFrequencySAVEExit1BG445.25 MHzPALATV Manual TuningFine-TuneStorage To 1SelectColor SystemAudio SystemCurrent CHSearchFrequencySAVEExit1BG445.25 MHzPALSetting Audio SystemNavigate to ATV Manual Tuning submenu, press 5or6tohighlight the Audio System item.12Press MENU to return to previous menu. Press EXIT to exit themenu screen directly.3ATV Manual TuningFine-TuneStorage To 1SelectColor SystemAudio SystemCurrent CHSearchFrequencySAVEExit1BG445.25 MHzPALNormally it is unnecessary to set audio system. However, ifabnormal sound occurs, you may try to adjust the audio system.Press 3or4to select the proper audio system. Press RED buttonto save.