Sanyo PLC-SU07N Owner's Manual

3IMPORTANT SAFETY INSTRUCTIONSAll the safety and operating instructions should be read beforethe product is operated.Read all of the instructions given here and retain them forlater use. Unplug this projector from AC power supply beforecleaning. Do not use liquid or aerosol cleaners. Use a dampcloth for cleaning.Do not use attachments not recommended by themanufacturer as they may cause hazards.Do not place this projector on an unstable cart, stand, ortable. The projector may fall, causing serious injury to a childor adult, and serious damage to the projector. Use only witha cart or stand recommended by the manufacturer, or soldwith the projector. Wall or shelf mounting should follow themanufacturer's instructions, and should use a mounting kitapproved by the manufacturers.Do not expose this unit to rain or use near water... forexample, in a wet basement, near a swimming pool, etc...Slots and openings in the back and bottom of the cabinet areprovided for ventilation, to insure reliable operation of theequipment and to protect it from overheating.The openings should never be covered with cloth or othermaterials, and the bottom opening should not be blocked byplacing the projector on a bed, sofa, rug, or other similarsurface. This projector should never be placed near or over aradiator or heat register.This projector should not be placed in a built-in installationsuch as a book case unless proper ventilation is provided.This projector should be operated only from the type of powersource indicated on the marking label. If you are not sure ofthe type of power supplied, consult your authorized dealer orlocal power company.Do not overload wall outlets and extension cords as this canresult in fire or electric shock. Do not allow anything to reston the power cord. Do not locate this projector where thecord may be damaged by persons walking on it.Never push objects of any kind into this projector throughcabinet slots as they may touch dangerous voltage points orshort out parts that could result in a fire or electric shock.Never spill liquid of any kind on the projector.Do not attempt to service this projector yourself as opening orremoving covers may expose you to dangerous voltage orother hazards. Refer all servicing to qualified servicepersonnel.Unplug this projector from wall outlet and refer servicing toqualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projector has been exposed to rain or water.d. If the projector does not operate normally by following theoperating instructions. Adjust only those controls that arecovered by the operating instructions as improperadjustment of other controls may result in damage and willoften require extensive work by a qualified technician torestore the projector to normal operation.e. If the projector has been dropped or the cabinet has beendamaged.f. When the projector exhibits a distinct change inperformance-this indicates a need for service.When replacement parts are required, be sure the servicetechnician has used replacement parts specified by themanufacturer that have the same characteristics as theoriginal part. Unauthorized substitutions may result in fire,electric shock, or injury to persons.Upon completion of any service or repairs to this projector,ask the service technician to perform routine safety checks todetermine that the projector is in safe operating condition.This projector is equipped with agrounding type AC line plug.Should you be unable to insert theplug into the outlet, contact yourelectrician. Do not defeat thesafety purpose of this groundingtype plug.Follow all warnings and instructions marked on the projectors.For added protection to the projector during a lightning storm,or when it is left unattended and unused for long periods oftime, unplug it from the wall outlet. This will prevent damagedue to lightning and power line surges.An appliance and cart combinationshould be moved with care. Quickstops, excessive force, and unevensurfaces may cause the applianceand cart combination to overturn.If the projector is to be built into a compartment or similarlyenclosed, the minimum distances must be maintained.Do not cover the ventilation slot on the projector.Heat build-up can reduce the service life of your projector,and can also be dangerous.GROUND20cm50cm 50cm 50cmPROJECTOR(FRONT)PROJECTOR(SIDE)WALL