-17-Optical Parts Disassemblies1 Remove 4 screws A (M2.5x4) and take the LCD/Prism ass’y off upwardfrom the optical unit.2 Remove each screw B and take the glass off upward.Note: The G-LCD panel has a pre-polarized glass is mounted between thepolarized glass-out (G) and LCD panel as Fig.7-2.LCD Panel/Prism Ass’yNote:Do not replace the LCD panelseparately otherwise it cannot obtain proper picture.1 Remove 9 screws (M3x10) to take the Optical Unit Top off upward.Fig.7- 1Fig.8m Polarized Glass-Out/Pre-Polarized Glass removal, Optical Unit Top removalAAAOptical Unit TopLCD Panel/PrismAss’yFig.7- 2* Glasses should be placed as thefilm attached side comes to theLCD panel side.LCD PanelBPolarized Glass-Out(G)Pre-Polarized Glass
