Sanyo PLC-SW10 Owner's Manual

Also see for PLC-SW10: Service manual

17BEFORE OPERATIONHOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENUDisplay ON-SCREEN MENUPress MENU button to display the ON-SCREEN MENU(MENU BAR). The red frame is the POINTER.Select the ITEM by pressing SELECT button. The dialogbox of the ITEM appears.Move the POINTER (red frame) to the ITEM ICON thatyou want to select by pressing POINT RIGHT/ LEFTbuttons.Move the POINTER to the ITEM that you want to adjustand adjust the ITEM by pressing SELECT button.Refer to the following pages for details of respectiveadjustments.Move the POINTER downward by pressing POINTDOWN button. (The shape of the POINTER becomes anarrow.)Select the ItemControl and adjust through ON-SCREEN MENU12354You can control and adjust this projector through the ON-SCREEN MENU. Refer to the following pages tooperate each adjustment in the ON-SCREEN MENU.1 MOVING THE POINTER2 SELECT THE ITEMMove the pointer (see the NOTE below) by pressing POINTbutton(s) on the TOP CONTROL or the REMOTE CONTROL.Select the item by pressing SELECT button.Used to select the item.SELECT BUTTONUsed to move thePointer UP/ DOWN/RIGHT/ LEFT.POINT BUTTONWIRELESS REMOTE CONTROLOPERATING ON-SCREEN MENUNOTE : Pointer is the icon on the ON-SCREEN Menu to selectthe item. See the figures on the section "FLOW OFON-SCREEN MENU" below.Used to select the item.SELECT BUTTONUsed to move thePointer UP/ DOWN/RIGHT/ LEFT.POINT BUTTONSTOP CONTROLSELECTBUTTONPOINTDOWNBUTTONMENU BARPOINTER(red frame)ITEM ICONPOINTER(red frame)MENUPOINTER