-20-Optical AdjustmentsFig.2- 21 Turn the projector on by a state of without FPC cables.2 Adjust the adjustment base of condenser lens ass’y to make coloruniformity in white.1) If the shading appears on the left or right of the screen asshown in Fig.2-1, loosen 2 screws A with the 2.0mm hex driv-er, and adjust the slot B to make color uniformity in green byusing a slot screwdriver.2) If the shading appears on the top or bottom of the screen asshown in Fig.2-2, loosen 2 screws C with the 2.0mm hex driv-er, and adjust the slot D to make color uniformity in green byusing a slot screwdriver3 Tighten screws A and C to fix the Condenser lens unit.Note:The relay lens adjustment must be carried out after completing thisadjustment.yxMoving of Slot DSlot Da bbaMoving of slot BFig.2- 1Slot BAC xyWhiteWhiteCondenser Lens adjustmentAC