Sanyo PLC-UF15 Owner's Manual

Also see for PLC-UF15: Specifications Dimensional drawing Service manual

Contents

42SETTINGLamp counter resetMove pointer to Lamp counter reset and thenpress SELECT button. Move arrow toreplaced lamp number (Lamp 1, Lamp2, Lamp 3 or Lamp 4) and then pressSELECT button.USBProjector modeSelect " " when controlling a projector with computer.NOTE: Before you control a projector by computer, install USB driver(optionally sold parts) and set up computer following instruc-tion in USB driver package. Contact your authorized dealer.This Projector is equipped with USB port for interactive operationbetween a projector and computer. Set mode following steps below.Wireless Mouse modeSelect " " when controlling a computer with Remote Control ofthis projector.Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMPREPLACE indicator stops lighting.Turn projector on, press MENU button and ON-SCREENMENU will appear. Press POINT LEFT/RIGHT button(s) tomove a red frame pointer to SETTING Menu icon.1Press POINT DOWN button to move a red frame pointer to“Lamp counter reset” and then press SELECT button.2Do not reset Lamp Replace Counter except after Projection lamp isreplaced.Another confirmation dialog box appears and select [Yes] toreset Lamp Replace Counter.4Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3or Lamp 4) and then press SELECT button. Message "Lampreplace counter Reset?" is displayed. Move pointer to [Yes] andthen press SELECT button.3NOTE: Be sure to reset correct lamp number otherwise LAMPREPLACE indicator continues lighting.Message "Lamp replace counter Reset?" isdisplayed. Move pointer to [Yes] and thenpress SELECT button.Closes SETTING MENU.Quit12 43Move a pointer to item and thenpress POINT LEFT/RIGHTbutton(s).USBPress SELECT button at this icon todisplay previous items.