Sanyo PLC-WL2500A Manual

Also see for PLC-WL2500A: Owner's manual Manual Quick reference guide Owner's manual Specifications

Sanyo PLC-WL2500A Manual Manual pdf 19 page image

PLC-WL2500A/WL2501A/ WL2503 A Basic Serial Command Specifications19/256.52. Computer 1 RGB (SCART) CommandCommand “C51”[CR]DetailSelect Scart input in Computer1.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.53. Computer 1 Component CommandCommand “C54”[CR]DetailSelect Component input in Computer1.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.54. AUTO PC ADJ. CommandCommand “C89” [CR]DetailExecute Auto PC Adj. function.This command works the same as “AUTO PC ADJ.” button of the remote control.Sending the command during Auto PC Adj. operation stops the operation. This isthe same operation as “AUTO PC” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.55. PRESENTATION TIMER CommandCommand “C8A” [CR]Detail Execute Presentation Timer.This command works the same as “P-TIMER” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.56. PRESENTATION TIMER (Exit) CommandCommand “C8B” [CR]DetailExit Presentation Timer menu.This command works the same as holding on the “P-TIMER” button of the remotecontrolResponse Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.57. KEYSTONE ↑CommandCommand “C8E” [CR]Detail Correct keystone distortion by reducing upper part of image.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]