ENGLISHFlow of installationFlow of installationTo use the projector via the networks, follow the setup procedures below.STEP 1 Connect the LAN and set the configuration.STEP 2 Network Configuration has completed.Decide depending on the LAN environment.➔ “2. Setup Procedures” (pp.11–16).Detailed LAN configurations need to be done with a browser later.First, complete the Wired LAN connection between computers and projec-tors, then start browser configurations.➔ “3. Basic setting and operation” (pp.17–32).Follow each chapter to operate the projector.■Operate and manage the projector ➔ “4. Controlling the projector” (pp.33-44)➔ “Power Control and status check” (p.34)➔ “Control” (p.36)➔ “PC Adj.” (p.40)➔ “Setting up the projector” (p.41)➔ “Projector information” (p.44)