Sanyo PLC-WTC500AL Service Manual

Also see for PLC-WTC500AL: Owner's manual Specifications Dimensional drawing Mode d'emploi

Contents

Sanyo PLC-WTC500AL Service Manual Manual pdf 9 page image

-9-MaintenanceTurn off the projector, and unplug the AC power cordfrom the AC outlet.First, clean up the dust on the projector and around theair vents.12Slide and open the filter cover.3Put the new one back into the position until it clicks andclose the filter cover. Make sure that the filter cartridgeis properly and fully inserted.5cAutIoNMake sure the filter cartridge is inserted in theprojector. If the filter cartridge is not inserted, theprojector cannot be turned on. Make sure the filtercover is closed when using the projector.Do not put anything into the air vents. Doing so mayresult in malfunction of the projector.4reset the filter counter and the scroll counter.6Replacing the Filter CartridgePull out the filter cartridge by holding the finger grip.recoMMeNdAtIoNWe recommend avoiding dusty/smoky environmentswhen operating the projector. usage in these environ-ments may cause a poor image quality.When using the projector under dusty or smoky conditions,dust may accumulate on a lens, liquid crystal panels, or op-tical elements inside the projector. Such condition may de-grade the quality of the projected image.When the symptoms above are noticed, contact your autho-rized dealer or service station for proper cleaning.order rePLAceMeNt FILter cArtrIdGetype No. PoA-FIL-100Service Parts No.: 610 342 9571Connect the AC power cord to the projector and turnon the projector.7Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes cloggedwith dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adverselyaffect the life of the projector. This projector has an electrically operated filter which helps you to replace the filtereasily. The projector monitors the condition of the filter at all time and replaces a filter with a new one automaticallywhen it detects the clogging.If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacementicon appears on the screen and the WARNING FILTER indicator on the top panel lights up. When you see this icon,replace the filter cartridge and reset the Filter counter and the Scroll counter.Filter coverFilter cartridge