Sanyo PLC-WXU300 - 2500 Lumens Manual

Also see for PLC-WXU300: Owner's manual Quick reference guide Owner's manual Technical information Owner's manual

Contents

Sanyo PLC-WXU300 - 2500 Lumens Manual Manual pdf 35 page image

PLC-WXU300 Expand Serial Command Functional Specifications34/728.10 Setting Command8.10.1 CF_LANG CommandCommand “CF_LANG_%1”[CR]%1“ENG” --------------------------- Select English“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“RUS” --------------------------- Select Russian“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“JPN” --------------------------- Select Japanese“FIN” ---------------------------- Select Finnish“POL” --------------------------- Select Polish“HUN” -------------------------- Select Hungarian“ROM” -------------------------- Select Romanian“THA” -------------------------- Select ThaiDetailsSet language for OSDThe language set by this command is stored in EEPROM and its setting iseffective after ALL is OFF.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.2 CF_MENUPOSITION CommandCommand “CF_MENUPOSITION_%1”[CR]%1 “SET” ------------------ Move the menu display to next positionDetailsChange the menu positionThis command is available in normal Power ON status.The language set by this command is stored in EEPROM and its setting is effectiveafter ALL is OFF.Position: top left - top right – center – bottom left-bottom right – top left-…Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.10.3 CF_AUTOSETUPPCADJ CommandCommand “CF_AUTOSETUPPCADJ_%1”[CR]%1 “ON” ------------------- Set Auto PC ADJ. function to ON“OFF” ------------------ Set Auto PC ADJ. function to OFFDetailsSet/Cancel Auto PC adj. functionThis command is available in normal Power ON status.Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once.e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Inputsearch are OFF, it returns error code “101”.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]