10Error messages Cause and correspondingSet up the parameter.Error when the communication is executed. The parameter setting (hostname, capture port) has not been set.➔ Check parameter setting (+p.90)It has not been registered to PJ as agroup.Error when Start Communication or Start real time capture is executed. TheIP address of the computer has not been registered.➔ Register the IP address by using the web browser (+p.97)Cannot be displayed as PJ is underdisplay.Error when Start Communication or Start real time capture is executed. Theother capture, viewer or memory viewer function is now operating.➔ Wait until the communication function is available.Cannot connect to PJ.Cannot establish the connection with the projector when the Startcommunication is executed, Terminate Communication, Capture transfer,Start real time capture or Terminate capture.➔ Check connection of the network cable.Cannot transfer data to PJ.Cannot transfer the data to the projector when the Start Communication,Terminate Communication, Capture transfer, Start real time capture orTerminate capture is executed. The time-out period is 10 seconds.➔ Check the connection of the network cable.Cannot receive data from PJ.Cannot receive the data from the projector when the StartCommunication, Terminate Communication, Capture transfer, Start realtime capture or Terminate capture is executed. The time-out period is 10seconds.➔ Check the connection of the network cable.Other PC has authority.Cannot complete "NetworkCommunication".When executing the Terminate Communication, you cannot quit thecommunication because other computer has an authorityOther PC has authority. Cannotobtain authority. Other computer has an authority.Invalid port number When the parameter is set, the reserved port number is specified.➔ Check the parameter setting (+p.90)PJ has not started NetworkCommunication. Close the windowand open it again.The projector might have turned off during the communication.➔ Check the projector power and re-execute "Start communication".Error informationError information
