134Chapter 10 Network Projector [Windows Vista]Use of "Connect to a Network Projector"This projector corresponds to "Connect to a Network Projector" * 1 function that is the standardequipment for Windows Vista * 2 . You can project the computer screen via a network without anysoftware by using this function.1 Select "Network" from the input menu of the projector.2 Open the Connect to a Network Projector dialog by clicking the Start button, clicking All Programs,clicking Accessories, and then clicking Connect to a Network Projector. Then, click Search for aprojector (recommended).3 A list of available projectors appears. Select the desired projector and click Connect button. If accessto the selected projector is protected by a network PIN code, the password input column appears.Enter a network PIN code and then click Connect button.This is displayed when youselect the projector which isprotected by a network PINcode.Not set the networkPIN codeSet the networkPIN codeNote:Search for a projector (recommended) wizard cannot find a projector if the projector and yourcomputer are in the different network segment that is separated by the router. Select "Enter theprojector address", and enter the network address of the projector to connect.Refer to the following page for details.
