Sanyo PLC-XE32 Owner's Manual

Also see for PLC-XE32: Brochure Service manual

Contents

Setting46Power managementF o r r e d u c i n g p o w e r c o n s u m p t i o n a s w e l l a smaintaining the lamp life, the Power managementfunction turns off the projection lamp when theprojector is not used for a certain period.When the input signal is interrupted and no button ispressed for more than 30 seconds, the timer displaywith "No signal" appears. The countdown starts to turnoff the lamp.Select one of the operations:Ready. . . . . . . . When the lamp has been fullycooled down, the POWER indicatorchanges to green blinking. Inthis condition, the projection lampis turned on if the input signal isreconnected or any button on theremote control is pressed.Shut down . . . . When the lamp has been fullycooled down, the power is turnedoff.Off . . . . . . . . . . Power management function is off.Then set the countdown timer with the Point ◄►buttons.Time left before Lamp is off.Press the SELECT buttonat Power managementand this box appears.Choose one of threesettings with the Point◄►buttons, and go to thetimer with the Point ▲▼buttons and set time withthe Point ◄►buttons.Power managementNote:Factory default is “Ready: 5 min.”