Sanyo PLC-XF47K Owner's Manual

Also see for PLC-XF47: Brochure Specifications Service manual Owner's manual

Contents

69IndicatorsProjector ConditionLAMPredREADYgreenWARNINGTEMP.redLAMPREPLACEorangeThe temperature inside the projector is elevated close to theabnormally high level.The temperature inside the projector is abnormally high. The projectorcannot be turned on. When the projector is cooled down enough andthe temperature returns to normal, the READY indicator lights greenand the projector can be turned on. (The WARNING TEMP. indicatorkeeps blinking.) Check and clean the filter.The projector has been cooled down enough and the temperaturereturns to normal. When turning on the projector, the WARNING TEMP.indicator stops blinking. Check and clean the filter.Any of 4 lamps becomes out, Lamp Mode is changed over from 4 lamps to 2lamps. And when any of 2 lamps are out, a projector operates with 1 lamp.The lamp has been used overtime. Replace the lamp immediatelyand then reset the lamp counter. The indicator will be turned off afterresetting the counter.The projector detects an abnormal condition and cannot be turned on.Unplug the AC power cord and plug it again to turn on the projector. Ifthe projector is turned off again, unplug the AC power cord and contactthe dealer or the service center. Do not leave the projector on. It maycause an electric shock or a fire hazard.@AppendixThe projector is detecting abnormal condition.@@@@@@@