Sanyo PLC-XK2200 - 2200 Lumens Manual

Also see for PLC-XK2200: Owner's manual User manual Owner's manual Manual Command list

PLC-XK2200 / 2600 / XK3010 Basic Serial Command Specifications3/231. Overview1.1. These specifications define projector control commands for PLC-XK2200/2600/ XK3010.1.2. The projector control commands are used to remotely control a projector through RS-232C from acomputer.2. Serial Interface Specifications2.1. Transfer SpecificationsItem SpecificationsSynchronous system AsynchronousTransmission Speed 9600 / 19200Data Length 8 bitParity N/AStop Bit 1Flow Control N/A1) Transmission speed: initial setting value is 19200.2) Transmission speed can be changed in service mode.2.2. ConnectionDedicated serial cable must be used for connection to a computer and a projector.PC ProjectorCOM 1 Control Port(D-Sub 9 Pin) (D-Sub 9 Pin)