Sanyo PLC-XL51 - 2700 Lumens Owner's Manual

Also see for PLC-XL51 - 2700 Lumens: Owner's manual Specifications Owner's manual Owner's manual Manual

Contents

Sanyo PLC-XL51 - 2700 Lumens Owner's Manual Manual pdf 9 page image

9Image viewer in the program mode for Windows1. Select "Program mode" on "Menu" of the browser window of the memory viewer. And press SELECTbutton. The program files (.dpf ) in the DispParam folder under the top directory are displayed.* If the DispParam folder is not placed in the top directory, the list of the folder name is displayed. Findthe DispParam folder which stores the program file manually to display the contents of the folder.2. Select a program file with point buttons and press SELECT button. The dialogue window appearsand select "Yes" and press SELECT button to start the auto display. The images programmed byprogram file are displayed on the screen. The display period of the image and the number of repeatare set with the program file.3. During displaying the image, you can control the displayed image with control buttons as describedin the table below.Notes for Windows:* The program file (.dpf ) is created with the program editor software. For further information, see theitem "Creating a program file [Program Editor]" (p.115) described on the separated network owner'smanual.* The DispParam folder is automatically created when the program file with the program editoris stored. For further information, see the item "Creating a program file [Program Editor]" (p.115)described on the separated network owner's manual.* When storing the program file into the SD memory card manually, create folder with the name of"DispParam" and store the program file into this folder.* In the program mode, the browser window lists the program files and folders only. Other files arenot listed.Point Operationd Manual playback with next filee Manual playback with previous file8 Start auto-playback7 Stop auto-playbackTermination of memory viewerTo terminate the memory viewer function, take one of methods described below.- Terminate with projector's on-screen menu.1. Select “Wired” or "Wireless" from the input menu of the projector. Press SELECT button.2. Select "Memory Viewer" with the point ed buttons and press SELECT button. The "Enter/Exit" palletof the memory viewer appears.3. Select "Exit" and press the SELECT button.- Terminate with memory viewer mode1. During the image displaying, press CANCEL button. The browser window appears on the screen.2. Press CANCEL button again. The cursor moves to menu item.3. Select "Exit" on the browser window with the point 7 8 buttons and press SELECT button.While operating the memory viewer, the Network Viewer and Network Capture function cannot be used.

/ 12

Related manuals for Sanyo PLC-XL51 - 2700 Lumens