-8-The projector provides the detection circuits of the power failure and the fan lock. When the detection circuit detectsan error at the power supply line or at the fan operation circuit, the projector will turn into the standby mode to protectthe other circuits defective.Circuit Protectionsthe projector is shut down; and the LAMP indicator islighting and other four indicators are blinking.When the projector detects an abnormal condition, it will beautomatically shut down to protect the inside of the projectorand all five indicators on the top panel blink. In this case, un-plug the AC power cord and plug it, and then turn on the pro-jector once again to verify operation. If the projector cannotbe turned on and these indicators are still blinking, unplugthe AC power cord.cAutIoNDO NOT LEAVE THE PROJECTOR WITH THEAC POWER CORD CONNECTED UNDER AN AB-NORMAL CONDITION. IT MAY RESULT IN FIREOR ELECTRIC SHOCK.LAMP indicator lights onand other four indicatorsblinkLed indicatorsPower failure and fan lock detection
