Sanyo PLC-XU106 - 4500 lm Manual

Also see for PLC-XU106: Throw Distance Guide Owner's manual Specifications Manual Owner's manual

PLC-XU106 Basic Serial Command Specifications18/246.52. Computer 1 Component CommandCommand “C54” [CR]DetailSelect Component input in Computer 1.Although projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1 or On2,ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.53. AUTO PC ADJ. CommandCommand “C89” [CR]DetailExecute Auto PC Adj. function.This command operates the same as “AUTO PC ADJ.” of main menu.Projector suspends Auto PC Adj. operation when receiving this command again.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.54. PRESENTATION TIMER CommandCommand “C8A” [CR]Detail Execute Presentation Timer.This command operates the same as “P-TIMER” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.55. KEYSTONE ↑CommandCommand “C8E” [CR]Detail Correct keystone distortion by reducing upper part of image.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.56. KEYSTONE ↓CommandCommand “C8F” [CR]Detail Correct keystone distortion by reducing bottom part of image.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.57. KEYSTONE →CommandCommand “C90” [CR]Detail Correct keystone distortion by reducing right part of image.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]