Sanyo PLC-XU3001 Owner's Manual

Also see for PLC-XU3001: Owner's manual

Contents

13 ENGLISHNetwork configuration*1 Set "On" only when the DHCP server is available on your network environment.*2 Set [255.255.255.255] if the network does not provide the gateway (router).*3 Set [255.255.255.255] if you do not use the function E-mail alert.3. Select "Network setting" in the Network menu and press SELECT button, and then theLAN setting screen will appear and selected LAN settings will be displayed. Adjust eachitem to the setting environment. Consult your system administrator about the detailedsettings.Press SELECT button in a row where you want to adjust, and adjust the figures with thePoint 54 buttons and move among the items with the Point buttons, and thenpress SELECT button to fix. Move to the next row with the Point 54 buttons to adjust.4. After completing all the settings, select “Set” and press SELECT button. Now, allprocedures have been done. To cancel the adjusted settings, select "Cancel" and pressSELECT button.You can confirm the LAN settings you have made from “Network information” (p.14). Insuch cases that the LAN cannot be connected, see this screen.DHCP: OnItem DescriptionDHCP....................Sets DHCP function On or Off. When you setup the network setting manually, select"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically setaccording to your network environment *1.IP address .............Sets IP address of the projector.Subnet ....................Sets Subnet mask according to your network environment.Gateway*2.............Sets IP address of the default gateway (Router).DNS*3 .......................Sets IP address of the DNS server.DHCP: OffNetwork setting* The numerical value is a setting example.