PLC-XU305A/355A Basic Serial Command Specifications18/266.41. D.ZOOM + CommandCommand “C30” [CR]Detail Enter Digital Zoom mode and expand image size.This command works the same way as “D.ZOOM ▲” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.42. D.ZOOM – CommandCommand “C31” [CR]Detail Enter Digital Zoom mode and reduce image size.This command works the same as “D.ZOOM ▼” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.43. S-Video CommandCommand “C34” [CR]DetailSelect S-Video input.Although Input search is set to On1 or On2, Input search is not executed with thiscommand while projector returns “OK”.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.44. Image Colorboard CommandCommand “C39” [CR]Detail Set image to Colorboard mode.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.45. POINTER RIGHT CommandCommand “C3A” [CR]DetailMove the Pointer of On-Screen Display Menu to the right.This command works differently from the pointer “>” of the projector and remotecontrol, and has no function of Volume +.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.46. POINTER LEFT CommandCommand “C3B” [CR]DetailMove the Pointer of On-Screen Display Menu to the left.This command works differently from the pointer “<” of the projector and remotecontrol, and has no function of Volume +.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]