-6-Slot BA baySlot dcOptical Adjustments1 Turn the projector on by a state of without FPC cables.2 Project all of lights on the screen.3 Adjust the adjustment base of integrator lens assy to make coloruniformity in white.1) If the shading appears on the left or right of the screen as shownin Fig.2-1, loosen 1 screw A , and adjust the slot B to makecolor uniformity in white by using a slot screwdriver.) If the shading appears on the top or bottom of the screen asshown in Fig.2-2, loosen screws c, and adjust the slots d tomake color uniformity in white by using a slot screwdriver4 Tighten screws A and c to fix the Integrator lens unit.Note:The relay lens adjustment must be carried out after completing thisadjustment.Integrator lens adjustmentFig.2-2Moving of Slot dWhiteWhiteMoving of slot BFig.2-1a byxx
