Sanyo PLC-XU4000 - 4000 Lumens Owner's Manual

Also see for PLC-XU4000: Specification sheet Owner's manual Manual Manual Dimensional drawing

Chapter 4 Controlling the ProjectorInformationThis page is to display the basic information of the projector status. ClickInformation on the main menu.Items DescriptionInput............................................Displays selected input and source.System .......................................Displays selected signal system.Signal ..........................................Input signal status (Yes, No)Screen ........................................Displays screen mode.Lamp status ............................. Displays lamp status with an icon. Refer to the table as shown below.Security .....................................Displays the security (PIN code lock) status (Yes, No)PJ time(h) ................................. Displays the accumulated use time of the projector.Lamp Corres. Value(h)..... Displays the use time (Corresponding value) of the lamp.Filter time(h) .......................... Displays the accumulated use time of the filter.Total power savings ......... Displays the total accumulated power savings and the total amount ofexhausted CO2 from the projector.Click this button toupdate the information.NetworkItems DescriptionMAC address..........................Displays MAC address of the projector.IP address ................................Displays the IP address of the projector.Information