Sanyo PLC-XU55 Quick Start Manual

Also see for PLC-XU55: Owner's manual Specifications Manual Service manual

Sanyo PLC-XU55 Projector Quick Start GuideHow to connect a computer to the projectorDVI is frequently found on Macintoshcomputers and some PCs:VGA is usually found on PCs and someMacintosh computers:Step One: Determine connector typeFirst determine the type of output connector on the computer, DVI or VGA (also know as D-sub,from its D shape). The projector comes with a cable to connect to your computer, one end has aDVI connector, the other a VGA connector.Step Two: Connect cable to the appropriate connectors on the computer and projectorConnect one end of the cable to the matching connector on your computer. Connect the otherend of the cable to the connector on the projector, see figure below. Note: The DVI connector islabeled COMPUTER IN 1, the VGA connector is labeled COMPUTER IN 2. You must set theprojector to use the correct input when you turn in on. See Step Four below.DVI connector( COMPUTER IN 1)VGA connector( COMPUTER IN 2)Composite Video input

/ 3

Related manuals for Sanyo PLC-XU55