-97-1. Turn the projector Power ON.2. Enter Special Menu.Press and hold the "POWER ON - OFF" button on the projector or theremote control for more than 20 seconds. The special menu appearson the screen.Press point Up( ) and DOWN ( )buttons to select item and thanpress SELECT button.3. Exit Special Menu.Select " " item and then press SELECT button.SpecialCounterFan controlRS232C1. CounterThe used time of the projector and the lamps are displayed. Counter123H123H123H123H123HProjectorLamp 1Lamp 2Lamp 3Lamp 42. Fan controlChange of a FAN output voltage. (Normal or Max)Press point Up( ) and DOWN ( )buttons to select item and thanpress SELECT button.Fan controlNormalMax3. RS232CSetup of Baud rate and Projector ID, and selection of the defaultvalue.Baud rate : 9600 / 19200Projector ID : 001 ~ 999Default value : Baud rate = 9600 / 19200, Projector ID = 001Press point Up( ) and DOWN ( )buttons to select item.Change data value with point LEFT ( ) and RIGHT ( ) buttons.RS232CBaudrateProjector IDDefault19200001Electrical Adjustments● Special Menu