Sanyo PLV-Z4 Owner's Manual

26InputHDMIWhen the video input signal is connected to the HDMI terminal,select HDMI.The projector automatically detects the incoming video signal andadjusts itself to optimize its performance.If the output signal of video equipment and the input signal of theprojector do not match, you might not get an image with the bestquality.If the black part of the picture appears unclear (too dark or toolight), try the input signal with “HDMI setup” in the Setting Menuon page 36.When the input signal is connected to the COMPUTER connector,select Computer.RGB (Analog) When the input source is analog coming from acomputer connected to the COMPUTERconnector, select RGB (Analog).RGB (Scart) When the input terminal is Scart with a DVDplayer connected to the COMPUTER connector,select RGB (Scart).Source Select MenuComputerInputComputerPress the Point 8 buttonto display the SourceSelect Menu.Use the Point ed buttonsto select the desiredsource and press the OKor Point 8 buttons.This projector automatically tunes to various types of computersbased on VGA, SVGA, XGA or SXGA with its Multi-scan systemand the Auto adj. function (p.32). If Computer is selected as asignal source, this projector automatically detects the signalformat and tunes to project a proper image without any additionalsetting. (The signal formats provided in this projector is shown onpage 52.)QuitExit this menu.