Sanyo PLV-Z5 Service Manual

Also see for PLV-Z5: Owner's manual Mode d'emploi

Contents

- 13 -Be sure to reset the lamp replacement counter after the lamp is replaced. When the lamp replacement counter is reset, theLAMP REPLACE indicator stops lighting.Turn the projector on and press the MENU button to displaythe On-Screen Menu. Select the Setting Menu with thePoint ed buttons. Press the Point 8 button to access thesub-menu items.Select Lamp counter reset and then press the the OK orPoint 8 buttons. “Lamp replacement counter reset?” willappear. Select [Yes] and then press the OK or Point 8buttons.12Another confirmation dialog box appears, and select [Yes] toreset the Lamp replacement counter.3Lamp Replacement Counter✔Note:• Do not reset the Lamp replacement counter without implementing lampreplacement. Be sure to reset the Lamp replacement counter only afterreplacing the lamp.Lamp counter resetSelect Lamp counter resetand press the OK or Point 8buttons. “Lamp replacementcounter reset” will appear.Select [Yes] and pressthe OK or Point 8buttons, then anotherconfirmation box willappear.Select [Yes] again toreset the lamp counter.ORDER REPLACEMENT LAMPReplacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following informationto the dealer.● Model No. of your projector : PLV-Z5 / PLV-Z5BK● Replacement Lamp Type No. : POA-LMP94(Service Parts No. 610 323 5998)The LAMP REPLACE indicator will light when the totallamp used time reaches 3,000 hours. This is to indi-cate that lamp replacement is required.The total lamp used time is calculated by using thebelow expression;Total lamp used time = Teco + Tnormal x (1.5)Teco: used time in Eco modeTnormal: used time in Normal/Auto1/Auto2 modeYou can check the lamp counter following procedure.1 Press and hold the POWER ON/STAND-BY buttonon the projector or the remote control unit for morethan 20 seconds.2 The projector used time and lamp used time will bedisplayed on the screen briefly.You can also check "Lamp Time" in the "InformationMenu". This value is actual lamp used time."Lamp Time" = Teco + TnormalHow to check lamp used timeCounterProjector 475HLampNormal 100HEco 375HCorresponding value 525HTotal lamp used timeInformation MenuLamp Counter Display Projector used timeTotal lamp used time (actual)475Lamp Replacement