Sanyo SAC-MST6 Instruction Manual
               | |
✱ How to attach:Slide the grinder case down alongside of the water tank. Make sure thegrinder case is firmly attached.✱ How to remove:Grab hold of the sides ofthe grinder case and pullit up vertically.✱ How to remove:Support the main unit with one handand grasp the indented part of thetank and lift it out vertically.✱ How to attach:Match the groove of the main unit withthe water tank and slide the water tankall the way down to the bottom until thetub of the main unit latches onto the slotof the tank.*Water tank must fit tightly on the bottom of the unitor water may not be dispensed properly for brewing.For your safety and to prevent damage to the glass carafe, please read andfollow these instructions.● Do not use it on stove or in microwave oven.● Do not drop or knock it against a hard surface.● Do not splash or immerse in water while the decanter is still hot.● Do not place a hot carafe on a wet surface.● Do not clean with a scouring powder, scouring sponge, steel wool, etc.● Do not fill with ice or stir with metal spoon.● Do not wash in a dishwasher.✱ How to remove:Turn the filter against the direction ofarrow, clockwise.*If the glass carafe gets scratched, it is more susceptible to breakage. If glass carafe gets crackedor broken, please discard it carefully.✱ How to attach:➀ Match tabs of the filter with cutoutof the body and push in.➁ Turn the filter to the direction of thearrow, counter-clockwise, until it stops.*There may be hot water remaining insideof the unit immediately after brewing. Toavoid injury, let the unit cool off completelybefore replacing filter to avoid injury.GENERAL INSTRUCTIONSHOW TO REMOVE AND ATTACH CHARCOAL FILTERHOW TO REMOVE AND ATTACH WATER TANKHOW TO REMOVE AND ATTACH THE GRINDER CASECARE FOR THE GLASS CARAFE5 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine