Sanyo TLS-S8000P Instruction Manual
Also see for TLS-S8000P: Service manual
                                                | |
Contents
| 
CONNECTIONSConnect the video camera and monitor TV as shown in the figure below.NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.AUDIOOUTMIC INREMOTEAC IN ~INVIDEOIN OUTRS485 BARS232CADDRESSONOFF485232S-VIDEOOUTINTERMINATEONOFFEXTTIMER IN COM WARNINGOUT TAPEEND OUT SWOUT COM OUT INALARMOUT IN COM TIMEROUTCLOCK SET SERIES OUT/NON REC OUT SERIESINTo remote control(sold separately)Video camera(sold separately)Monitor TV (sold separately)Coaxial cable(sold separately)ToVIDEO INjackToVIDEOOUTjackFrom an externalaudio sourcePowercordTo outlet– +DC 10-30V INPUSHOPENNOTES:X For more details, please refer to the manualsaccompanying all other devices. If the connectionsare not made properly, it may cause a fire or damagethe equipment.X You can use a VA-RMN01 Remote Control Unit (soldseparately) to control remotely the VCR.X If there is no video signal when the power is turnedon, “NO VIDEO” will be displayed on-screen.X Use a DC power cord rated A.W.G 18 (1.25 mm2) ormore.X The table below indicates the DC power sourceoutput and DC power maximum cord lengths.DC power source output DC powermaximum cordlengths18 V or more 2 A 6 m12 ~ 16 V 3 A 6 m10 V 5 A 6 m10 V 4 A 2 mThis VCR is equipped with S-VIDEO input/output jacksfor high quality video signal input and output. Ifconnecting this unit to a device equipped with S-VIDEOinput/output jacks, please use an S-cable (soldseparately).When both the VIDEO IN jack and S-VIDEO IN jack areconnected, the S-VIDEO IN jack will have priority.RE4QS/EX (TLS-S8000P GB) Wed. May, 23/2001English 7 |
Related manuals for Sanyo TLS-S8000P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine