Sanyo VCC-WD8874 - Wide Dynamic Range Color Instruction Manual

Also see for VCC-WD8874 - Wide Dynamic Range Color: Specifications Specifications Service manual

Contents

specifications

Sanyo VCC-WD8874 - Wide Dynamic Range Color Instruction Manual Manual pdf 1 page image

SANYO Electric Co., Ltd.Printed in China1AC6P1P3382--L5CU2/XE, US (1108KP-HS)VCC-WD8875PVCC-WD8874FrançaisEnglishINSTRUCTION MANUALScanning system : VCC-WD8875P:PAL standard 625 lines, 50 fields/sec.VCC-WD8874:NTSC standard 525 lines, 60 fields/sec.Image sensor : 1/3” progressive CMOSNumber of effective pixels : 800 (H) x 600 (V)Horizontal resolution : 550 TV lines typicalMinimum illumination : Gain high: 0.8 lx (F1.2, color mode)0.08 lx (F1.2, B/W mode)Video output : 1.0 V(p-p)/75 Ω, composite, BNCVideo S/N ratio : More than 48 dB (AGC off: More than 50 dB)Light control : Optical auto iris lens/Electronic iris (indoor use)Auto iris lens drive : DCLens mount : CS mountFlange back : 12.5 mm ± 0.5 mm / 0.5 in. ± 0.02 in. adjustmentMenu : On screen displayWide dynamic range : ON (65 dB typical)/OFFBacklight compensation : OFF/ON (Center zone metering)White balance : ATW/ManualGain control : Normal/High/OFFElectronic shutter : VCC-WD8875P:1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.VCC-WD8874:1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec.Aperture compensation : Normal/High/Low/OFFDay/Night : Auto / Color / B/WSync system : Internal sync/Line lockCamera title : OFF/ON, Up to 16 characters, adjustable title positionDigital noise reduction : ON (1, 2)/OFFOperating environment : Temperature: -10°C - +50°C (14°F - 122°F)Humidity: less than 90 % RH (no condensation)Power supply : VCC-WD8875P: 24 V AC ±10%, 50 Hz/ 12 - 15 V DCVCC-WD8874: 24 V AC ±10%, 60 Hz/ 12 - 15 V DCPower consumption : Approx. 6.9 W (with auto-iris lens)Weight : Approx. 330 g (11.6 oz.) (without lens)Appearance and specifications are subject to change without prior noticeor obligations.71 (2.8)45 (1.8)11 (0.4)119.5 (4.7)1(0.04)129 (5.1)1/4"-20UNC Unit: mm (inch)b DIMENSIONSb Flange-back adjustmentThis normally does not need adjustment. If the picture is out of focus atthe telephoto position, adjust the flange-back position as describedbelow.1 Loosen.2 Set to the maximum telephoto position and focus the picture.3 Set to the maximum wide-angle position and focus the picture.• Repeat steps 2 and 3 until the image stays in-focus when changingfrom a wide-angle position to a telephoto position.4 Tighten.31 42■ In case of a problemDo not use the unit if smoke or a strange odor comes from the unit,or if it seems not to function correctly. Turn off the powerimmediately and disconnect the power cord, and then consult yourdealer or an Authorized Sanyo Service Center.■ Do not open or modifyDo not open the cabinet, as it may be dangerous and cause damageto the unit. For repairs, consult your dealer or an Authorized SanyoService Center.■ Do not put objects inside the unitMake sure that no metal objects or flammable substance get insidethe unit. If used with a foreign object inside, it could cause a fire, ashort-circuit or damage. Be careful to protect the unit from rain, seawater, etc. If water or liquid gets inside the unit, turn off the powerimmediately and disconnect the power cord, and then consult yourdealer or an Authorized Sanyo Service Center.■ Be careful when handling the unitTo prevent damage, do not drop the unit or subject it to strong shockor vibration.■ Do not install this unit close to magnetic fieldsThe magnetic fields may result in unstable operation.■ Protect from humidity and dustTo prevent damage, do not install the unit where there is greasysmoke or steam, where the humidity may get too high, or wherethere is a lot of dust.■ Protect from high temperaturesDo not install close to stoves, or other heat sources, such asspotlights, etc., or where it could be subject to direct sunlight, as thiscould cause deformation, discoloration or other damages.Be careful when installing close to the ceiling, in a kitchen or boilerroom, as the temperature may rise to high levels.■ Cleaning• Dirt can be removed from the cabinet by wiping it with a soft cloth.To remove stains, wipe with a soft cloth moistened with a softdetergent solution and wrung dry, then dry by wiping with a softcloth.• Do not use benzine, thinner or other chemical products on thecabinet, as this may cause deformation and paint peeling. Beforeusing a chemical cloth, make sure to read all accompanyinginstructions. Make sure that no plastic or rubber material comesinto contact with the cabinet for a long period of time, as this maycause damage or paint peeling.The camera is a precision instrument. Handle it carefully and alwaysfollow the safety precautions. If the camera requires service, nevertry to repair it yourself or open the casing.For servicing, maintenance, or repairs, consult your dealer or anAuthorized Sanyo Service Center.For US and Canadian UsersSafety GuardThis installation should be made by a qualified service person and shouldconform to all local codes.For EU UsersFor Russian UsersThis product is certified by an official certificationcompany which is authorized by the Russian Federation.ДЛЯ ПОЛЬЗОВАТЕЛЕЙ РОССИЯДанная продукция сертифицирована официальныморганом по сертификации Российской Федерации.SERVICETHIS SYMBOL INDICATES THAT THERE ARE IMPORTANTOPERATING AND MAINTENANCE INSTRUCTIONS IN THELITERATURE ACCOMPANYING THIS UNIT.WARNING:TO REDUCE A RISK OF FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.For the customers in CanadaThis Class B digital apparatus complies with Canadian ICES/NBM-003.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the followingmeasures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.– Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.Changes or modifications not expressly approved by Sanyo may void the user'sauthority to operate this camera.Please note:Your SANYO product is designed and manufacturedwith high quality materials and components whichcan be recycled and reused.This symbol means that electrical and electronicequipment, at their end-of-life, should be disposedof separately from your household waste.Please dispose of this equipment at your localcommunity waste collection/recycling centre.In the European Union there are separate collectionsystems for used electrical and electronic products.Please help us to conserve the environment we livein!This symbol mark and recycle system areapplied only to EU countries and not appliedto countries in other areas of the world.SANYO FISHER Sales (Europe) GmbHStahlgruberring 4, D-81829 München, GermanySANYO Electric Co., Ltd.1-1, Sanyo-cho, Daito City, Osaka 574-8534, JapanAbout this manual• Before installing and using the camera, please read this manual carefully.Be sure to keep it handy for later reference.• This manual covers two models. Any difference between the two models isindicated when necessary.b Lens attachmentThe camera has a mount for the CS mount lens.Depending on the type of the lens, the shape of the lens plug may differ. Inthis case, consult your dealer or an Authorized Sanyo Service Center.iridix technology is provided by Apical Limited, UK.b Camera attachmentInstall the camera in a correct location so that the intended objectcan be monitored properly.You should also adjust on the monitor side.• Depending on the conditions of use, installation andenvironment, please be sure to make the appropriate settingsand adjustments. If you need help with installation and/orsettings, please consult your dealer or an Authorized SanyoService Center.• If you want to use a commercially available platform for thecamera, select an appropriate type, taking into consideration thegross weight of the camera and platform, and secure it on a firmplace.• Images may blur under extremely bright lighting; adjust thelighting angle to get clear images.PREPARATIONBrake coil (+)Drive coil (–)Brake coil (–)Drive coil (+)LENS terminal for auto iris lensApply adapter ring (sold separately) when you useany C mount lens.5 mm/0.2 in. max.BABAA Bracket screws (longer) B Camera screws (shorter)Wide Dynamic Range CameraSPECIFICATIONS PRECAUTIONS

/ 2

Related manuals for Sanyo VCC-WD8874 - Wide Dynamic Range Color