Sanyo VDC-DP9584N - Network Camera Instruction Manual

Also see for Pan-Focus VCC-P9574N: Specifications

Contents

Sanyo VDC-DP9584N - Network Camera Instruction Manual Manual pdf 20 page image

19Setting Camera Performance 1 Select .2 Point a camera to a white paper or wall to projectan image on the whole screen, and press the SETbutton.RThe cursor “q” lights off, and white balance adjustment willstart. The adjustment will end after about 2 seconds when “q”lights again.• If the adjustment does not yield a satisfactory result, press theSET button again.■ To perform fine adjustment of colorIn the “AWC SETTING” screen, select – “SET”, andpress the SET button.R The “MWB SETTING” screen appears. Specify values manually(see next page).3 Select – “BACK” and press the SETbutton.RReturns to the camera performance screen.■ If you want to close the settings screenSet to “END” and press the SET button.A One-Push Adjustment (AWC)AWC SETTING·AWC LOCKGO TO MWBSETSET y·AWC LOCKSETWhite paper or wallMEMO: Transferring to the “MWB SETTING” screen through TO MWB>, white balance mode (see page 18) will bechanged to “MWB”.