Sanyo VDC-HD3100P Summary Manual

Also see for VCC-HD3300: Specifications Summary manual

Contents

Sanyo VDC-HD3100P Summary Manual Manual pdf 5 page image

4Lens AdjustmentAdjusting focusNEAR FAR SETRoughly focus the subject using NEAR/FAR buttons.Make adjustment while watching the monitor.Press the SET button.The camera automatically focuses on the subject. Note that the color of the statusindicator “FOCUSING” turns from black to orange.The status indicator changes to “ERROR” when the subject cannotautomatically come into focus.In this case, manually adjust the focus. ( Electronic manual)Press the NEAR/FAR button to adjust the focus.Make adjustment so that the FA bar gauge indicates the highest level.When the subject comes into focus, the color of the status indicator“FOCUSING” changes from black to orange.Pressing the buttons moves the FB bar gauge .The position changes step by step each time the button is pressedand continuously at a high speed when the button is held down.Press the SET button for 2 seconds or more.The focus adjustment screen will close.The focus adjustment screen will also close automatically if left idlefor 5 minutes or more.VDC-HD3500P/HD3500/HD3300P/HD3300:If video is out of focus in either color or black-and-white mode,adjust the focus in respective modes.••■