Sanyo VHR-310 Instruction Manual

Also see for VHR-310: Service manual

iThis VCR has a built-in tuner capable of memorizing up to 44television channels.You can select any position from 1 to 44 to preset the channelsthat can be received in your area.Before startingSet the TV receiver channel to the preset video channel or tothe AV mode.Example: To preset UHF channel “23” to channelposition “1”.O Press the PRESET button.This will activate the channel preset mode and the channelposition number will start to blink.Channe~ position number@Select the desired channel position number (Example: “1”)by pressingthe CHANNEL (+ or -) buttonor the numericbutton.Then, press the OK button.o Press the CHANNEL (+ or -) button to tune the broadcastyou want to assign to that position number.The CHANNEL (+) button will access the followingbroadcast.The CHANNEL (-) button will access the previousbroadcast.The picture from the selected channel will appear on thescreen.Broadcast tuning i~dicatorsmmO When the broadcast from the desired channel (Example:channel 23) is received, press the OK button.If the tuning of a channel is not optimum, it can be improved bymanual fine tuning.OSelect the channel with the unsatisfactory broadcast.@Press the PRESET button twice.@Press the CHANNEL (+ or -) button to obtain the bestpicture and sound.~ When the best picture and sound are obtained press theOK button.Channel 23 has been preset to channel position number“1”.At that time the channel position number will changefrom “l” to “2”.To assi n a channel to another position number, repeatsteps doto’.@Press the PRESET button.