| 
– 18 –Adjustment value determination is effectuated using the "STDAFPOS" and "FOCUS" values.If FOCUS=focus1, focus2, focus3, focus4, focus5 and the ad-justment values fulfill the conditions below, they are determinedas within specifications.Adjustment value determination1050<=STD_AFPOS<1240-40<=focus1<=+40, -50-60<=focus3<=+60, -60<=focus4<=+60,-150<=focus5<=+1503. AWB AdjustmentPreparation:POWER switch: ONAdjusting method:1. When setting the camera in place, set it to an angle so thatnothing appears in any part of the color viewer except thewhite section. (Do not enter any light.)2. Double-click on the DscCalDi.exe.3. Click the AWB, and click the Yes.4. AWB adjustment value will appear on the screen.5. Click the OK.Adjustment value determination is effectuated using the "AGC",“CHECK", “CHECK_ND”, "MS", “IRIS”, “IRIS_GAIN” and“IRIS_OFFSET” values.If AGC= a1, a2, a3, a4, a5, CHECK= wc0, wc1, wc2,CHECK_ND= wnc0, wnc1, wnc2, MS= ms1, ms2, ms3, ms4,IRIS= s1, s2, s3, s4, s5, IRIS_GAIN= g and IRIS_OFFSET=o the adjustment values fulfill the conditions below, they aredetermined as within specifications.Adjustment value determination100550wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40wnc0=128 ± 2, wnc1=128 ± 2, wnc2=130 ± 4014002300100<=s1<=220, 100<=s2<=220, 100<=s3<=220,100<=s4<=220, 100<=s5<=220s1>s2>s3>s4>s50<=g<=2550<=o<=255Adjustment values other than the above are irrelevant.4. CCD White Point Defect Detect AdjustmentPreparation:POWER switch: ONAdjustment method:1. Double-click on the DscCalDi.exe.2. Select “CCD Defect” on the LCD “Test”, and click the “Yes”.3. After the adjustment is completed, OK will display.4. Click the OK.CameraPattern box(color viewer)DscCalDi xOKFocus ResultSTD_AFPOS=1168FOCUS=-5,-14,-15,-4,-71ADJ_PZPOS=15!Dsc Calibration xOKAWB Result:1:AGC=187,356,525,694,8633F_AGC=1,2WB=276,516,678CHECK=128,128,141WB_ND=275, 515, 691CHECK_ND=128, 128, 142IRIS_GAIN: 52IRIS_OFFSET: 153MS=1705,2101,2378,2934IRIS=171,156,137,116,1090IRIS=0Copy |
