Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual

Also see for VPCCA6OR: Service manual Instruction manual Safety manual

Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual Manual pdf 12 page image

English 10Setting to the card reader mode1 Start your computer, and use the supplied USB interface cable toconnect your camera to the computer.h Connect the camera’s USB/AV terminal to the computer’s USBconnector.h The USB Connection Screen appears on the camera’s monitor.2 Select “CARD READER”, and press the SET button.CAUTIONInsert and pull out the cable carefullyi When connecting the cables, make sure that the cable plugs are correctlyoriented and that they match the shapes of the terminal sockets on thedevices. Push the plugs in straight when connecting them. If undue force isused to connect a cable, it may permanently damage the connector pins inthe terminal socket.i Do not use excessive force when connecting and disconnecting cables.i Please connect the dedicated USB interface cable to your computer’s USBconnector. Do not connect it to the USB port on your monitor or keyboard,or to the USB hub. Be especially careful when installing the driversoftware. In some instances, it may not be possible to correctly install thedriver software.CANCELPC CAMERAPictBridgeCARD READERUSB CONNECTIONTo USB connector on the computerSupplied dedicatedUSB interface cableTo the USB/AV terminalon the cameraUSB/AV terminal